SPECIFICATIONS Adjustable, Locking Stand Adapter
Type Integral, dynamic locking, adjustable through 180, with stan-
Dynamic (moving coil) dard 5/8-27 thread
Frequency Response
4.451
20 to 10,000 Hz
NOTE: The curve below shows onaxis response at a distance
of 2 feet from a uniform sound source. Your response may vary,
depending on microphone position
+20
3 mm
(1/8 in.)6.406180
+1025 mmSTAND 3.750
(1 in.)
51 mmADAPTER
(2 in.)
0ADJUSTMENT
dB
.06 mKNOB
(2 ft)
10
MICROPHONE
STAND
-20
2 3 4 5 67892 3 4 5 6789FIGURE 3
2050 100100010000 20000
Net Weight
Hz
605 grams (21.6 oz)
FIGURE 1
CERTIFICATION
Polar Pattern Eligible to bear CE Marking. Conforms to European EMC
Directive 89/336/EEC. Meets applicable tests and performance
Supercardioid, rotationally symmetrical about microphone axis
180°180°criteria in European Standard EN55103 (1996) parts 1 and 2,
150°150°150°150°
for residential (E1) and light industrial (E2) environments.
120°120°120°120°FURNISHED ACCESSORIES
Storage Bag . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26A25
90°90°90°90°5/8 to 3/8 (Euro) Thread Adapter . . . . . . . . . . . .95A2050
20 dB20 dB
15 dB15 dB
60°60°60°60°OPTIONAL ACCESSORIES
10 dB10 dB
5 dB5 dB7.6 m (25 ft) Cable . . . . . . . . . . . . . . . . . . . . . . . . .C25E, C25F
30°30°30°30°
00REPLACEMENT PARTS
250 Hz2500 HzCartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .R175
500 Hz
1000 HzScreen and Grille Assembly . . . . . . . . . . . . . . . . .RK321
Plug (connector) Assembly . . . . . . . . . . . . . . . . . .90F1984
FIGURE 2
NOTE: Use care when removing the cartridge holder from the base
to prevent breakage of the lead wires.
Output Level (at 1,000 Hz)
Open Circuit Voltage: 64 dBV/Pa* (0.6 mV) For additional Service or parts information, please contact Shures
Service department at 18005162525. Outside the United
*1 Pa = 94 dB SPL
States, please contact your authorized Shure Service Center.
Impedance
Rated impedance is 150 & (45 & actual) for connection to
microphone inputs rated low Z
Phasing
Positive pressure on diaphragm produces positive voltage on
pin 2 with respect to pin 3
Maximum SPL
174 dB at 1000 Hz (calculated)
Connector
Threepin professional audio connector (male XLR type)
Case
Silver blue enamelpainted die cast metal with hardened,
matte-nished steel grille
2 |